Nomadix AG 3000 Quick Start Manual
  1. Manuals
  2. Brands
  3. Nomadix Manuals
  4. Gateway
  5. AG 3000
  6. Quick start manual

Nomadix AG 3000 Quick Start Manual

Access gateway
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

AG 3000 Quick Start
This document provides instructions and reference material for getting started with the Nomadix
Access Gateway 3000 (AG 3000) product. If you have any problems, please contact our
technical support team at +1.818.575.2590, or email: support@nomadix.com.
Start Here
1. Unpack the AG 3000 and place the product on a flat and stable work surface.
2. Connect the power cord.
3. Connect the DB9 female-to-female (NULL) serial cable (6ft. length) between the
product's "serial port" and your computer.
4. Power up your computer and turn on the product.
5. Start a HyperTerminal session to communicate with the AG 3000 via the product's serial
interface. Use the following configuration settings for your session:
Bits per Second
9600
6. Log in to the Command Line interface:
The default for both the Username and Password is
7. Go to the "Configuration" section on the next page and configure the AG 3000 for your
network.
P/N 200-1021-001-M
Copyright © 2005 Nomadix, Inc.
Data Bits
Parity
8
None
Stop Bits
Flow Control
1
None
admin
.
| 1 |

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AG 3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nomadix AG 3000

Summary of Contents for Nomadix AG 3000

  • Page 1 6. Log in to the Command Line interface: The default for both the Username and Password is admin 7. Go to the “Configuration” section on the next page and configure the AG 3000 for your network. P/N 200-1021-001-M | 1 |...
  • Page 2 AG 3000 Quick Start (cont’d) Configuration Note: The network side of the AG 3000 must be connected to a live network that can access the Internet or you will not be able to receive the License Key from our server (Step 3).

  • Page 3: Pppoe Client Configuration

    IP and DNS Parameters PPPoE Client Configuration For AG 3000 with network configuration set to PPPoE client, enter DNS information as shown in step 1a and PPPoE client configuration information as shown in step 1b. Please note that in case of PPPoE client, only the tertiary DNS server is configurable. It is assumed that the Primary and Secondary DNS servers are provided by the PPPoE server.
  • Page 4 AG 3000 Quick Start (cont’d) Step 1a: Entering your DNS Information DNS Parameter Your Settings Examples Domain Name Nomadix2.com Host Name (no spaces) Primary DNS Server (not configurable) Secondary DNS Server (not configurable) Tertiary DNS Server (optional) 100.100.100.6 Step 1b: Entering your PPPoE Information...
  • Page 5 AG 3000 Quick Start (cont’d) Sample Screen Responses DNS Parameters and PPPoE Configuration You will be asked to reboot after you enter this information. Please enter (y)es when prompted to reboot. | 5 |...

  • Page 6: Step 2: Entering Your Location Information

    When you have entered your IP Addresses, DNS and Location information, the system will prompt you to accept or decline the End User License Agreement (EULA). You must accept the terms of the EULA before the AG 3000 can retrieve its License Key. To retrieve the License Key, enter [es] at the prompt.

  • Page 7: Step 5: Configuring The System

    1440 Step 5: Configuring the System Log in to the AG 3000 and use the graphical Web Management Interface (WMI) to configure the product’s features. You have now established a basic configuration for the AG 3000 that enables “Plug and Play” Internet connectivity.

Table of Contents