Table of Contents
Advertisement
Enter a valid
4.
If you have chosen to manage this subscriber by user name only, you do not need to enter a
MAC address (but you must enter a user name).
Enter the
5.
IP Address
Enter a valid
6.
In the
7.
Username
and you do not want to assign a user name, skip Step 9 (password).
User names and passwords are case-sensitive. Having a user name and password
is an optional service that subscribers may request (for example, if they are using
more than one machine, or moving between locations and they want an additional
level of security). If they request this service, they are prompted at the login
screen for the user name and password you assign here. Solution providers can
charge a fee for this service, at their discretion.
If you assigned a user name, you must now assign a
8.
In the
9.
Expiration Time
subscriber's authorized access time. When the assigned time expires, the subscriber must
"re-subscribe" to the service.
Enter an amount in the
10.
The next two fields (
11.
fields for simple notations about the subscriber.
Define the
12.
subscriber (in Kbps).
13.
If using Class-Based Queuing, enter the primary and subclass for this subscriber in the
field. Enter these values in the format: <top-level class>.<subclass>
Class
(top-level class and subclass separated by a period). See
page 11
and
Select a policy from the
14.
page 157
for more information.
Enable
15.
Countdown after login
logins. If the option is not enabled, user timeouts take effect the moment the subscriber is
added.
Enable
16.
STMP Redirection
redirected by the global SMTP redirect configuration.
Click on the
17.
if you want to reset all the values to their previous state.
218
for the subscriber.
MAC Address
of the subscriber.
address for this subscriber.
Subnet
field, enter a user name for this subscriber. If you entered a MAC address
field, define the duration (in hours and minutes) for the
field.
Paid
User Definable 1
Max Upstream Bandwidth
"Class-Based Queueing" on page
QoS Policy
to allow the specified user to have their SMTP traffic
button to add this subscriber to the database, or click on the
Add
and
User Definable 2
and
Max Downstream Bandwidth
105.
menu. See
"Setting up Quality of Service {QoS}" on
if you want the timeout amount to take effect after the user
A
CCESS
.
Password
) are optional. Use these
"Class-Based Queueing" on
System Administration
G
ATEWAY
range for this
button
Reset
Advertisement
Table of Contents
