Table of Contents
Advertisement
Each of the displayed ports has individual iNAT / Subscriber tunnel settings
accessible by clicking on that port's link.
The interface allows easy deletion of any iNAT address range.
On NSE releases 8.2 and later, iNAT settings are configured individually for each interface.
From the Web Management Interface, click on
1.
(NSE releases 8.2 and later
a specific interface to change its iNAT configuration.
™
The iNAT
Enable or disable the iNAT feature, as required.
2.
If you enabled iNAT, you have the option of enabling or disabling the following VPN
3.
protocols:
PPTP
124
only) A list of current iNAT settings appears. You can select
screen appears:
, then
Configuration
System Administration
A
G
CCESS
ATEWAY
iNAT.
Advertisement
Table of Contents
