Nomadix Access gateway User Manual page 106

For
2. Configurable Ports
Enable or disable administrator access to any of the following interfaces:
3.
Telnet Access

 Web Management Access (HTTP)
Web Management Access (HTTPS)

FTP Access

 SFTP Access
 SSH Shell Access
Blocking or unblocking interface access will terminate the current session.
Do not enable the blocking of all interfaces without setting up and enabling
SNMP. Enabling the blocking of all interfaces and disabling SNMP will
completely block access to the Access Gateway administration interface. For
assistance, contact Nomadix Technical Support.
Enable or disable subscriber-side interface blocking for any of the following interfaces
4.
 Telnet Access:
the NSE Telnet interface. Default setting is enabled.
Web Management Access (HTTP):

access from the subscriber-side to the NSE WMI. Default setting is enabled.
Web Management Access (HTTPS):

Management access from the subscriber-side to the NSE WMI. Default setting is
enabled.
 FTP Access:
NSE. Default setting is enabled.
 SFTP Access:
the NSE. Default setting is enabled.
SSH Shell Access:

subscriber-side to the NSE CLI. Default setting is disabled.
Click the check box for
5.
the
Submit
94
, enter a
enables/disables blocking of Telnet access from the subscriber-side to
enables/disables blocking of FTP access from the subscriber-side to the
enables/disables blocking of SFTP access from the subscriber-side to
enables/disables blocking of SSH shell access from the
Access Control
button to save your change.
and an
Telnet Port HTTP Port
enables/disables blocking of Web Management
enables/disables blocking of secure Web
if you want to enable this feature, then click on
A G
CCESS ATEWAY
.
System Administration