Nomadix Access gateway User Manual page 157

A G
CCESS ATEWAY
with the option to terminate their connection (via the ICC) and be billed only for the actual
time he/she was online. The Access Gateway is equipped with a serial port to facilitate
connectivity with the system's CLI or a customer's Property Management System.
Some PMS vendors may require you to obtain a license before integrating the
PMS with the Access Gateway. Check with the PMS vendor.
Some Property Management Systems may use interfaces that are incompatible
with the Access Gateway. If your Access Gateway is having trouble
communicating with a solution provider's PMS, please contact technical support.
Refer to
Before you can change the PMS settings, a PMS must be connected to the Access Gateway via
the serial port on the rear panel. See also,
Network" on page
The Access Gateway can query most popular Property Management Systems for confirmation
of the "names" and "room numbers" of hotel guests—effectively becoming a "clone" of a
popular Micros POS system. This functionality allows hotels to seamlessly deploy wireless
networks (or alternatively use low-cost wired access concentration equipment) that either do
not support port-ID or do so in a proprietary format that Nomadix does not currently support—
and still be able to bill directly to the room.
Nomadix has certified interoperability with a variety of Property Management Systems:
Encore

FCS

Galaxy (GEAC)

GuestView

Holodex (AutoClerk)

Hilton 1

Hilton 2

Hotel Info Sys (HIS)

Igets.net

Innquest

LanMark

LIBICA

Logistics

System Administration
"Contact Information" on page
67.
365.
"Connecting the Access Gateway to the Customer's
145