Accessory Box Contents; Start Here - Nomadix Access gateway User Manual

This quick start document provides instructions and reference material for getting started
with the Nomadix Access Gateway products, specifically the AG 2400 and AG 5800.

Accessory Box Contents

AG 2400
1 – U.S. (NEMA 5-15p) Power Cord
1 – EU (Schuko CEE7/7) Power Cord
1 – 6' RJ45 – DB9 Console Cable
2 – Rack Mount Brackets and PS bracket
1 – Bumper and Screw Kit
AG 5800
1 – U.S. (NEMA 5-15p) Power Cord
1 – EU (Schuko CEE7/7) Power Cord
1 – 6' RJ45 – DB9 Console Cable
2 – Rack Mount Brackets
1 – Bumper and Screw Kit

Start Here

Unpack the Nomadix Access Gateway and place the product on a flat and stable work
1.
surface.
Register the gateway for support services by completing and returning the Nomadix
2.
Gateway Registration Form; hardcopy enclosed or obtain the form online at
http://www.nomadix.com/registration.
Connect the power cord.
3.
Connect to the Access Gateway (AG). There are two ways to connect to the Access
4.
Gateway (AG):
Serial Connection:

Connect the RJ45 console cable to the product's console port and the DB9 female to your
computer.
44
A G
CCESS
Installing the Access Gateway
ATEWAY