Nomadix Access gateway User Manual page 373

Access gateway
Hide thumbs Also See for Access gateway:
Table of Contents

Advertisement

A
G
CCESS
ATEWAY
Error Message
Warning: before using this command you must
FTP a valid boot image to the flash.
Warning: no DHCP services are available to
subscribers.
"x" is ambiguous.
"xxx" is invalid, enter ...
Troubleshooting
Cause
When upgrading the software, the system
needs the new boot image file. You must FTP
the file from NOMADIX™ to your local hard
drive.
This message is displayed because you have
disabled both the external DHCP relay and the
system's DHCP service. To make DHCP
available to subscribers, at least one of these
functions must be enabled.
The system has more than one option it can
display. You must provide additional
characters to narrow the system's choices
down to just one.
Your input is not recognized by the system.
361

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag2400Ag5600Ag5800Ag 3100Ag 5500Ag 2300

Table of Contents