Nomadix Access gateway User Manual page 253

A G
CCESS ATEWAY
2. If you want subscribers to see the ICC (pop-up window), click on the check box for
Display ICC (Information and Control Console)
Choose which ICC you want to be displayed (either the featured ICC or the simple Logout
3.
Console). Enable one of the following:
ICC (Information and Control Console)

Nomadix Logout Console

If you enabled either of the ICC pop-up options, you can choose a unique name for the
4.
console. Simply type a meaningful name in the
Define the physical location where you want the Nomadix Logout Console to appear on
5.
the subscriber's screen.
Choose one of the following options:
Upper Left Corner

Upper Right Corner

Lower Left Corner

Lower Right Corner

6. Define how you want to display the subscriber session time:
Elapsed Time

 Time Remaining
You must now decide what you want the ICC to do if the subscriber closes it.
7.
Choose one of the following options:
Redisplay itself

Logout (return the subscriber to a "pending" state) – valid only with RADIUS and

Post Paid PMS.
You must now assign the buttons that you want to display to subscribers.
Assigning Buttons
When assigning the redirect buttons that will appear in the ICC, you can define one
(large button) and up to 8 smaller buttons (
Button
following parameters:
System Administration
(how much time has elapsed since the start of the session)
(how much time is remaining for the session)
to enable this feature.
field.
Title
through
Button 2 Button 9
ISP Logo
), with the
241