Table of Contents
Advertisement
Define the
11.
device (in Kbps).
If using Class-Based Queuing, enter the primary and subclass for this device in the
12.
field. Enter these values in the format: <top-level class>.<subclass> (top-level
class and subclass separated by a period). See
"Class-Based Queueing" on page
13.
Select a policy from the
page 157
for more information.
Enable
14.
STMP Redirection
redirected by the global SMTP redirect configuration.
Click on the
Add
want to reset all the values to their previous state.
Adding a Group Type Profile
Several changes have been made to improve the NSE's handling of group account
administration.
Group accounts can now be configured with a maximum user value, which limits the
number of subscribers that can be logged in through the account at any given time.
Group accounts can now be added via XML using the GROUP_ADD command.
The overall layout and behavior of the WMI Subscriber Profile page has been
modified to better reflect the configuration status of different account types, and to
better support the Group Account changes:
The method of identifying an account as "group" has been modified. Instead of
simply selecting a checkbox on the Subscriber page, group accounts now
constitute a separate account "type" (along with Subscriber and Device). The
Group Account checkbox has been removed from the bottom of the page, and
replaced with a 'Group Account' button in the profile selection at the top.
A 'Maximum Users per Group' field has been added to allow setting the group
user limit.
220
Min Downstream Bandwidth
QoS Policy
to allow the specified user to have their SMTP traffic
button to add this device to the database, or click on the
and
Max Downstream Bandwidth
"Class-Based Queueing" on page 11
105.
menu. See
"Setting up Quality of Service {QoS}" on
A
G
CCESS
ATEWAY
range for this
Class
and
button if you
Reset
System Administration
Advertisement
Table of Contents
