Table of Contents
Advertisement
Enable or disable the
2.
must provide a valid
For more information about setting up SSL, go to
page
342.
SSL support allows for the creation of an end-to-end encrypted link between the Access
Gateway and its clients by enabling the Internal Web Server (IWS) to display pages under
a secure link—important when transmitting AAA information in a network.
Adding SSL support to the Access Gateway requires service providers to obtain digital
certificates from VeriSign™ to create HTTPS pages. Instructions for obtaining certificates
are provided by Nomadix.
To enable SSL Support, your Access Gateway's flash must include the server.pem,
cakey.pem, and cacert.pem certificate files (the "cacert.pem" file is provided
with your Access Gateway). For assistance, contact
If you want to designate a portal page, you must enable the
3.
leave this feature disabled.
The Portal Page IP or DNS address are added to the IP passthrough list
automatically.
If you enabled the Portal Page feature, provide the following supporting information:
4.
Portal Page URL
Parameter Passing (enabled or disabled)
Parameter Signing (including Method, Parameters, and Shared Secret)
See
signing.
Portal XML POST URL
Portal XML Post Port
Support GIS Clients (enabled or disabled)
GIS stands for Generic Interface Specification, a document written by iPass.
Enabling the Smart Client option in the Access Gateway automatically supports
all GIS compliant clients using the Internal Web Server. Enabling "Support for
GIS Clients" under the Portal Page feature means that the Access Gateway will
defer the management of the GIS clients to the Portal Page server.
Block IWS Login Page (enabled or disabled)
88
SSL Support
Certificate DNS Name
Redirection Parameter Signing
feature, as required. If you enable SSL Support, you
.
"Setting Up the SSL Feature" on
for more information about parameter
A
CCESS
Technical
Support.
feature, otherwise
Portal Page
System Administration
G
ATEWAY
Advertisement
Table of Contents
