Table of Contents
Advertisement
A
G
CCESS
ATEWAY
3.
Assign a valid ID number (0-7) to each server.
Enter the IP addresses to identify the location of the system and AAA SYSLOG servers on
4.
the network (the default for both is 0.0.0.0).
When logging is enabled, log files and error messages are sent to these servers for future
retrieval. To see sample reports, go to
"Sample AAA Log" on page
Sample Screen Response:
Configuration>log
Enable/disable System Log
Enter System Log Number (0-7) [0
Enter System Log Filter
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug
Select an option from above
Enter System Log Server IP
Enable/disable System Log Save to file [disabled
Enable/disable AAA Log
Enter AAA Log Number (0-7) [0
Enter AAA Log Filter
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug
Select an option from above
Enter AAA Log Server IP
Enable/disable AAA Log Save to file [disabled
Enable/disable RADIUS History Log
Enter RADIUS History Log Number (0-7) [0
Installing the Access Gateway
"Sample SYSLOG Report" on page 333
332.
[disabled
]: enable
]: 2
[7]: 7
[255.255.255.255]: 10.10.10.10
[disabled
]: enable
]: 2
[7]: 7
[255.255.255.255]: 10.10.10.10
[disabled
]: enable
]: enable
]: enable
]: 2
and
63
Advertisement
Table of Contents
