Blocking A Subscriber Interface {Subscriber Interfaces - Nomadix Access gateway User Manual

A G
CCESS ATEWAY
1. From the Web Management Interface, click on
The Delete Static Port-Mapping Entries screen appears:
2. Enter the External IP Address
3. Click on the
your changes to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on page 200

"Adding Static Ports {Static Port-Mapping Add}" on page 283


Blocking a Subscriber Interface {Subscriber Interfaces}

The Access Gateway allows System Administrators to block subscriber interfaces.
System Administration
and/or the
Delete button to delete the static port, or click on the
System , then Static Port-Mapping Delete.
External Port of the item you want to delete.
Reset button to reset
285