Table of Contents
Advertisement
A
G
CCESS
ATEWAY
Adding a Port-Location Assignment
This procedure shows you how to add a port-location assignment. If you want to update an
existing assignment, go to
1.
From the Web Management Interface, click on
Location Assignments screen appears:
Enter a location identifier in the Location field. Locations can be assigned as an alpha,
2.
numeric, or alpha-numeric value unless a PMS interface is used (see note).
If you are using a PMS interface, ensure that the "Location" field consists only
of numbers (no alpha characters or symbols).
All alpha characters (used for locations and descriptions) are case-sensitive.
3.
In the
Port
System Administration
Updating a Port-Location
field, enter the port (the VLAN ID when using 802.1Q 2-way).
Assignment.
Port-Location
, then
Add
. The Add Port-
205
Advertisement
Table of Contents
