Table of Contents
Advertisement
PMS solutions such as Galaxy require this option to be enabled to work with
Nomadix Micros POS emulation in wireless hospitality networks. Some PMS
systems send selection records as lastname, padded with white space (ascii 0x20)
on the right, followed by a comma along with first name initial and some flags.
Normally, the Access Gateway compares every character of the name as typed by
the user to the contents of the selection record. If the "Match Last Name Only"
feature is enabled, the Access Gateway compares only the user input with the part
of selection record which comes before the comma (assumes that the user only
enters a last name). If the "Skip First Char in Last Name" feature is enabled, the
space is reserved for purposes other than the first character of the last name, so
the Access Gateway will skip the first space in the last name field for name
verification.
8.
Post-paid PMS only: If you selected a Post-paid PMS option, you can define an
(in minutes) and an
Timeout
the thresholds when a "post-paid" hotel guest will be automatically disconnected from the
service.
Property Management Systems generally operate at different baud rates. You must now
select an appropriate baud rate for your chosen PMS.
Select the
9.
Speed of PMS Interface
not sure which baud rate to choose, select
default.
You must now select the
10.
billing plans you established in
page
231.
Because some Property Management Systems do not allow you to enter characters, you
must enter these service descriptions as a numeric value only (no characters or delimiters).
150
Idle Data Threshold
and Serial Settings from the available list. If you are
Not Sure
Type of Service Post Mappings
"Defining the Billing Options {Billing Options}" on
A
(in bytes). These selections determine
and the system will attempt to use the
you require relative to the
System Administration
G
CCESS
ATEWAY
Idle
Advertisement
Table of Contents
