Advertisement
GATEWAY QUICK START GUIDE
About this Guide
This Quick Start Guide provides instructions and reference material for getting started with the Nomadix Access Gateway
Products, specifically the AG 2500, AG 5900 and EG 6000.
Documentation and Technical Support
For more detailed information about the individual gateways and all other Nomadix Product Documentation, User Guide,
XML DTD, MIB and Radius Dictionary can be found using the following URL:
http://www.nomadix.com/technical-support-documentation
If you have any problems, please contact our technical support team at +1.818.575.2590, or via email:
Accessory Box Contents
The AG 2500, AG 5900 and EG 6000 are shipped with the following Accessory Box to assist with product installation.
Contents varies depending on what was ordered.
Qty
1
1.8m U.S. (NEMA 5-15p) Power Cord (Type B): United
States, Canada, Mexico and Japan.
1
1.8m EU Schuko CEE7/7 Power Cable (Type F): Most
everywhere in Europe and Russia except for UK and
Ireland.
1
1.8m U.K. Power Cord (BS1363 Type G): used in the
United Kingdom, Ireland, Malaysia, Singapore and Hong
Kong
.
1
1.8m China Standard (Type I) 3 Prong GB 2099 Power
Cord, used in China, Australia , New Zealand, Argentina.
1
1.8m India (Type D), 3 Prong Power Cord, used mainly in
India.
1
1.8m RJ45 – DB9S Console Cable (Black)
1
1.8m EG 6000 USB to DB9 Console Cable
1
RJ45 – DB9 Adaptor (Grey)
PMS connection
1
RJ45 -DB9S PMS Adaptor (part number 715-4001-002)
and Optical Isolator 715-4001-009)
1
19" Rack Mount Brackets Kit
1
Power Transformer and mounting bracket
1
Bumper Kit for desktop installations.
1
Rack Mount Bracket are different for the AG 2500 and AG 5900/EG 6000
May 2019
Accessory Box
Description
1
and screws.
Information subject to change without notice.
support@nomadix.com
Comments
Included with product shipped in North
America and Mexico.
(part no. 715-4001-004)
Optional item: (part no. 715-4001-003)
Optional item: (part no. 715-4001-005)
Optional item: (part no. 715-4001-006)
Optional item: (part no. 715-4001-007)
AG 2500 and AG 5900 only
AG 6000 only:
Optional Item: 715-4001-001
AG 2500 and AG 5900 only
EG 6000 only. Not sold separately.
Included with EG 6000 Hospitality PMS
Software Module (716-6017-001)
All Products
AG 2500 only
All Products
1
Advertisement
Table of Contents
Related Manuals for Nomadix AG 2500
Summary of Contents for Nomadix AG 2500
- Page 1 If you have any problems, please contact our technical support team at +1.818.575.2590, or via email: support@nomadix.com Accessory Box Contents The AG 2500, AG 5900 and EG 6000 are shipped with the following Accessory Box to assist with product installation. Contents varies depending on what was ordered. Accessory Box...
-
Page 2: Installation And Cabling
There are (2) methods to initialize/start-up the Gateway, most common is via the WAN Ethernet port or alternatively by using the asynchronous RJ45 port on the AG 2500 or AG 5900, or the USB the console port on the EG 6000, both configurations are... - Page 3 Table 2: Comm port settings. On the AG 2500 and AG5900 use the RJ45 console port, on the EG 6000 use the USB console port. Please note: the EG 6000 console port is only on the USB port. Both methods are depicted below [illustration 2]: Illustration 2: Console Port connections With everything connected and powered up, you are now ready to configure the configure the Gateway’s WAN for a static IP...
-
Page 4: Initial (Startup) Configuration
The initial minimal WAN port configuration mode will be displayed as shown in Figure 1. Figure 1: Initial minimal WAN port configuration. Select the desired configuration mode and use the following steps to configure the WAN port for either Static IP, DHCP client or PPPoE. Nomadix Inc. - Page 5 GATEWAY QUICK START GUIDE Step 1a: Static WAN IP Configuration Accept static as the default configuration mode and enter the following mandatory settings shown in Figure 2. Figure 2: Initial WAN port settings A WAN port summary page will then be displayed as shown in Figure 3. Figure 3: WAN port static IP configuration summary page May 2019 Information subject to change without notice.
- Page 6 Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN port settings. When finished with the settings, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location information. Nomadix Inc.
- Page 7 GATEWAY QUICK START GUIDE Step 1c: PPPoE Dynamic IP Client Configuration Enter p[ppoe] when prompted. Enter the following mandatory settings for a PPPoE connection with dynamic PPP IP configuration shown in Figure 6. Figure 6: Selecting PPPoE with dynamic IP configuration A WAN port summary page will then be displayed as shown in Figure 7.
-
Page 8: Step 2: Entering Your Location Information
The system will now prompt you to accept or decline the End User License Agreement (EULA). You must accept the terms of the EULA before the AG can retrieve its license key. To retrieve the license key, enter y[es] as shown in Figure 9. The AG retrieves the license key from the Nomadix license key server, then reboots. Nomadix Inc. -
Page 9: Step 4: Configuring The System
GATEWAY QUICK START GUIDE Figure 9: License key retrieval. NOTE: The date and time the gateway receives a valid license from our server for the first time is considered the Software License Subscription start date. Step 4: Configuring the System Log in to the AG and use the graphical Web Management Interface (WMI) to configure the product’s features. -
Page 10: Sample Network Setup
Table 3: DHCP server configuration Sample Network Setup An example of a basic network including an AG is shown in Figure 10 Figure 10: Example of a network setup Additional Documentation Additional Product documentation can be found at: http://www.nomadix.com/technical-support-documentation Nomadix Product Documentation Nomadix Inc.