Nomadix Access gateway User Manual page 139

A G
CCESS ATEWAY
Authenticate via pre-shared key

Authenticate via X.509 Certificate



Note that the files must exist on flash first.
In the
6. IKE Channel Security Parameters
 Acceptable Encryption Algorithm
checkboxes (you must check at least one option).
 Acceptable Hash Algorithm
(you must check at least one option).
7. Click Add
Tunnel Settings screen.
Click the
8. Back to Main IPSec Tunneling Settings page
Settings screen.
Modifying an Existing IPSec Tunnel Peer
Click on the IPSec tunnel peer link that you wish to modify in the
1.
table. The IPSec Tunnel Peer Settings screen opens.
Modify the settings as desired.
2.
3. Click:
Modify

Remove

 Reset
original settings.
4. Click the Back to Main IPSec Tunneling Settings page
Settings screen.
Managing IPSec Security Policies
You can add a new IPSec security policy or modify the settings of an existing IPSec security
policy from the IPSec Tunnel Settings screen.
System Administration
Enter the filename of the private certificate in the
Enter the filename of the public certificate in the
to add the IPSec tunnel peer to the
to save the changes to the peer.
to remove the peer from the
to undo any changes you made to the peer settings and return the peer to its
– Enter the pre-shared key in the
–
section, select the following settings:
s – Check the
DES
– Check the ,
MD5 SHA
IPSec Tunnel Peers
IPSec Tunnel Peers
Shared Key
Private Key Filename
Certificate Filename
, and/or
3DES, AES128CBC
, and/or checkboxes
AES128
table on the IPSec
link to return to the IPSec Tunnel
IPSec Tunnel Peers
table.
link to return to the IPSec Tunnel
field.
field.
field.
127