Table of Contents
Advertisement
A
G
CCESS
ATEWAY
Assigning Banners
1.
From the Subscriber Console (Information and Control Console - ICC) Setup screen, click
on the
Configure Banners
Console - ICC) Banners Setup screen appears:
You can display up to 5 banners, but they must be defined here. Banners require all
the same parameters that "buttons" use (see
the addition of 3 (three) more. These are:
Duration
Start Time
time (for when the banner is displayed).
Stop Time
time (for when the displayed banner closes).
When assigning images and times for banners, refer to:
"Time Formats" on page
System Administration
link. The Subscriber Console (Information and Control
– Defines how long the banner is displayed in the ICC.
– This is an optional parameter that you set if you want to assign a "start"
– This is an optional parameter that you set if you want to assign a "stop"
245.
Click here to return to the previous
screen
"Assigning Buttons" on page
"Pixel Sizes" on page 244
241), with
and
243
Advertisement
Table of Contents
