Table of Contents
Advertisement
A
G
CCESS
ATEWAY
Adding a Device Type Profile
1.
From the Web Management Interface, click on
The Add a Subscriber Profile to the Database screen appears:
Choose the
2.
If required, enable the
3.
4.
Set the
802.1Q Device Port
5.
Enter a valid
6.
Enter the
IP Address
Enter a valid
7.
In the
8.
Username
The next two fields (
9.
fields for simple notations about the device.
10.
Define the
device (in Kbps).
System Administration
account type for this profile.
Device
Proxy Arp For Device
if the device is connected to a specific VLAN.
MAC Address
for the device.
of the device.
address for this device.
Subnet
field, enter a user name for this device.
User Definable 1
Min Upstream Bandwidth
Subscriber Administration
feature.
and
User Definable 2
and
Max Upstream Bandwidth
, then
) are optional. Use these
range for this
Add.
219
- Quick Links:
- Access Control
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Access gateway and is the answer not in the manual?
Questions and answers