Deleting Static Ports {Static Port-Mapping Delete - Nomadix Access Gateway User Manual

Select the protocol (
10.
Click on the
11.
values to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on page

"Deleting Static Ports {Static Port-Mapping Delete}" on page


Deleting Static Ports {Static Port-Mapping Delete}

Static Port-Mapping allows the network administrator to setup a port mapping scheme that
forwards packets received on a specific port to a particular static IP (typically private and mis-
configured) and port number on the subscriber side of the Access Gateway. The advantage for
the network administrator is that free private IP addresses can be used to manage devices (such
as Access Points) on the subscriber side of the Access Gateway without setting them up with
public IP addresses.
This procedure shows you how to add static ports.
From the Web Management Interface, click on
1.
The Delete Static Port-Mapping Entries screen appears:
Enter the
2. External IP Address
Click on the
3.
your changes to their previous state.
For more information about Static Port-Mapping, see also:
238
or ) from the pull-down menu.
TCP UDP
button to add this static port, or click on the
Add
and/or the
button to delete the static port, or click on the
Delete
Reset
, then
System Static Port-Mapping Delete.
of the item you want to delete.
External Port
A G
CCESS ATEWAY
button to reset all
159.
238.
button to reset
Reset
System Administration