Figure 5-1. Reflash Program Window - Comtech EF Data SLM-7650 Installation And Operation Manual

SLM-7650 Satellite Modem
Maintenance
The following is a basic overview of the steps involved in an upgrade. This is not
intended to be the complete procedure. Refer to the procedure provided with the upgrade
for the complete and detailed instructions.
•
•
•
•
•
•
•
•
Run the Reflash program (Figure 5-1)
Enable the USB Reflash in the Utility - System menu.
Connect the USB cable to the USB port on the front panel of the modem.
The modem will go into Reflash mode.
Select the new upgrade file.
Upload the Application.
When the upgrade is complete, remove the USB cable.
The modem will re-boot and configure to the default parameters.

Figure 5-1. Reflash Program Window

5–2
Revision 4
MN/SLM7650.IOM