Table of Contents
Advertisement
Appendix A. REMOTE CONTROL
This appendix describes the remote control operation of the SLM-7650.
A.1
Disclaimer – Remote Commands
Comtech EF Data reserves the right to make changes in the remote control commands of
the product described in this manual at any time without notice and without obligation to
notify any person of such changes. If there are any questions regarding your equipment
or the information in this manual, please contact the Comtech EF Data Customer Support
Department.
NOTE: The firmware referenced in this manual may be an earlier version of the actual
A.2
About Remote Commands
This document defines the protocol and command structure for remote control and status
monitoring of the SLM7650 Satellite Modem.
Remote controls and status information are transferred via an asynchronous serial
communications link.
Commands and data are transferred on the remote control communications link as
US ASCII-encoded character strings.
The remote communications link is operated in a half-duplex mode.
A remote controller or terminal initiates communications on the remote link. The modem
never transmits data on the link unless it is commanded to do so.
Firmware number:
Software version:
firmware supplied with the unit.
OPERATION
FW/9875-2B
2.1.3
A–1
Advertisement
Table of Contents
