Comtech EF Data SLM-7650 Installation And Operation Manual page 184

Comtech ef data satellite modem installation and operation manual
Table of Contents

Advertisement

SLM-7650 Satellite Modem
Remote Control Specifications
Bulk Consol.
Status
(continued)
Parameter
Number
(Note 1)
89
(Note 2)
90
(Note 1)
91
(Note 2)
92
(Note 1)
93
(Note 1)
94
(Note 1)
95
(Note 1)
96
(Note 2)
97
(Note 2)
98
(Note 1)
99
(Note 1)
100
(Note 7)
101
102
103
104
105
106
Parameter Name
(Command Reference)
ASYNC TX Channel Parity
(ref. 'TOCP_' command).
ASYNC RX Channel Parity
(ref. 'ROCP_' command).
ASYNC Communications Type
(ref. 'ACT_' command).
ASYNC Communications Type
(ref. 'ACT_' command).
AUPC Local Power Enable
(ref. 'LPC_' command).
AUPC Nominal Power Value
(ref. 'NOMP_' command).
AUPC Minimum Power Value
(ref. 'MINP_' command).
AUPC Maximum Power Value
(ref. 'MAXP_' command).
AUPC EBN0 Target Set Point
(ref. 'ENSP_' command).
AUPC Max. Tracking Rate
(ref. 'MAXT_' command).
AUPC Local Carrier Loss
(ref. 'LCL_' command).
AUPC Remote Carrier Loss
(ref. 'RCL_' command).
Terrestrial Interface Format
(ref. 'TIF_' command).
reserved null field.
reserved null field.
reserved null field.
reserved null field.
Transmit IESS-310 Mode
(ref. 'T310_' command).
Description
p89 = xxxx, where 'xxxx' is the currently programmed parity.
p90 = xxxx, where 'xxxx' is the currently programmed parity.
p91 = n, where 'n' is '0' (RS232), '1' (RS485-4Wire), or '2'
(RS485-2Wire).
p92 = n, where 'n' is '0' (RS232), '1' (RS485_4WIRE), or '2'
(RS485_2WIRE).
p93 = n, where 'n' is '0' (off), '1' (on).
p94 = snn.n, where 'snn.n' Nominal Power Value in dBm.
p95 = snn.n, where 'snn.n' Minimum Power Value in dBm.
p96 = snn.n, where 'snn.n' Maximum Power Value in dBm.
p97 = nn.n, where 'nn.n' EBN0 Target Set Point in dB.
p98 = n.n, where 'n.n' Max. Tracking Rate in dB/Min.
p99 = n, where 'n' is '0' (HOLD), '1' (NOMINAL), or '2'
(MAXIMUM).
p100 = n, where 'n' is '0' (HOLD), '1' (NOMINAL), or '2'
(MAXIMUM).
p101 = n, where 'n' is '0' (Balanced G.703), '1' (UnBalanced
G.703), '2' (RS-422 J1), or '3' (RS-422 J6).
p106 = n, where 'n' is '0' (off), '1' (on).
A–42
Revision 4
MN/SLM7650.IOM

Advertisement

Table of Contents
loading

Table of Contents