Table of Contents
Advertisement
This chapter provides unpacking and installation instructions, system options, and a
description of external connections.
The equipment contains parts and assemblies sensitive to damage by Electrostatic Discharge
(ESD). Use ESD precautionary procedures when touching, removing, or inserting PCBs.
CAUTION
2.1
Unpacking
The modem and manual are packaged in pre-formed, reusable, cardboard carton
containing foam spacing for maximum shipping protection.
Do not use any cutting tool that will extend more than 1 inch into the container and cause
damage to the modem.
CAUTION
To remove the modem:
1. Cut the tape at the top of the carton indicated by OPEN THIS END.
2. Remove the cardboard/foam space covering the modem.
3. Remove the modem, manual, and power cord from the carton.
4. Save the packing material for storage or reshipment purposes.
5. Inspect the equipment for any possible damage incurred during shipment.
6. Check the equipment against the packing list to ensure the shipment is correct.
7. Refer to Section 2.2 for installation instructions.
Chapter 2. INSTALLATION
2–1
Advertisement
Table of Contents
Need help?
Do you have a question about the SLM-7650 and is the answer not in the manual?
Questions and answers