Table of Contents
Advertisement
SLM-7650 Satellite Modem
Remote Control Specifications
Parameter 30:
Parameter 31:
Parameter 32:
Parameter 33:
Parameter 34:
Parameter 35:
Parameter 36:
Parameter 37:
Parameter 38:
Interface Service Channel Level TX1 (ref. "ISCL_TX1_"
command).
P30 = snn.n, where 'snn.n' is -6.0 to +8.0 in steps of 2 dB.
Interface Service Channel Level TX2 (ref. "ISCL_TX2_"
command).
P31 = snn.n, where 'snn.n' is -6.0 to +8.0 in steps of 2 dB.
Drop Data Format (ref. "DDF_" command).
P32 = n, where 'n' is '0' (T1), '1' (T1ESF), '2' (E1CCS), or '3'
(E1CAS).
Bulk Drop Channel Assignment (ref. "BDCA_"
command).
P33 = dd;cc_dd;cc_dd;cc_dd;cc..., as defined by the
'BDCA_' command.
IDR Backward Alarm TX1 (ref. "BW_TX1_" command).
P34 = n, where 'n' is '0' (OFF) or '1' (ON).
IDR Backward Alarm TX2 (ref. "BW_TX2_" command).
P35 = n, where 'n' is '0' (OFF) or '1' (ON).
IDR Backward Alarm TX3 (ref. "BW_TX3_" command).
P36 = n, where 'n' is '0' (OFF) or '1' (ON).
IDR Backward Alarm TX4 (ref. "BW_TX4_" command).
P37 = n, where 'n' is '0' (OFF) or '1' (ON).
IDR Transmit ESC Type (ref. "TET_" command).
P38 = 0, where 'n' is '0' (2x32Kbit/s Audio) or '1' (64Kbit/s
Data).
A–8
Revision 4
MN/SLM7650.IOM
Advertisement
Table of Contents
