Replacing Vj Take Up Unit Cnt Board Assembly - MUTOH ValueJet Service Manual

(3) Replacing Drive Collar
1. Remove the screws (round head spring screw M3
unit scroller (left).
3
2. Remove the drive collar.
3. To reassemble the unit, reverse the removal procedure.

4.12.5 Replacing VJ Take Up Unit CNT Board Assembly

(1) Removing Board Chassis
1. Remove the screws (round head spring screw M3
(out).
1
AP-74109 Rev 1.1
1
2
×
8: 2 pieces) that retain the drive collar on the take up
表 4-130
No.
2 1
2
3
×
6: 4 pieces) that retain the board chassis on the chassis
表 4-131
No.
1
2
2
3
3
4-110
ValueJet 1304 Service manual
Part name
Drive collar
Screws that retain the drive
collar (round head spring screw
×
M3 8)
Take up Unit scroller (left)
Part name
Board chassis
Screws that retain the board
chassis (round head spring
×
screw M3 6)
Chassis (out)