Replacing Vj Take Up Unit Cnt Board Assembly - MUTOH ValueJet 1304 Service Manual

VJ-1304 Maintenance Manual
(3) Replacing Drive Collar
1. Remove the screws (round head spring screw M3
unit scroller (left).
3
1
2. Remove the drive collar.
3. To reassemble the unit, reverse the removal procedure.

4.12.5 Replacing VJ Take Up Unit CNT Board Assembly

(1) Removing Board Chassis
1. Remove the screws (round head spring screw M3
(out).
1
CS9050, CS9150
×
2
×
6: 4 pieces) that retain the board chassis on the chassis
2
3
2
4-99
8: 2 pieces) that retain the drive collar on the take up
No.
1 Drive collar
2 Screws that retain the drive
collar (round head spring screw
×
M3 8)
3 Take up Unit scroller (left)
No.
1 Board chassis
2 Screws that retain the board
chassis (round head spring
screw M3
3 Chassis (out)
4 Parts Replacement
Part name
Part name
×
6)
Rev.-01