3.13 Replacing Take-Up Unit (Option)
3.13.7 Replacing Peripheral Devices of VJ Take-Up Unit
Motor Assy
(1) Replacing Drive Roller
1.
Remove take-up scroller.
2.
Remove the flat head screws (2 pieces) retaining drive roller on driving axis C.
1
No.
Driving roller
1
2
set screw thin tip M4
3
Driving axis C
3. Remove driving roller.
4. Replace driving roller.
5.
To reassemble the unit, reverse the removal procedure.
(2) Replacing Take-Up Motor Assy
CAUTION
Do not touch motor right after starting up the printer. Otherwise, you may be burned.
3.13.7 Replacing Peripheral Devices of VJ Take-Up Unit Motor Assy
2
3
Name
×
6
NOTE
Remove the following parts before replacing take-up motor Assy.
Take-up scroller:
•
Tension arm
•
:
"3.13.1 Removing Tension Arm" p.3-162
Take-up unit
•
"3.13.2 Removing Take-Up Unit" p.3-164
:
Take-up unit cover
•
"3.13.3 Removing Take-Up Unit Cover" p.3-165
:
Board chassis
•
:
"(1) Removing Board Chassis" p.3-169
1.
Remove the screws (3 pieces) retaining motor mounting plate on the right of inside chassis.
1
3
No.
1
Motor mounting plate
2
pan-head screw with spring washer and flat washer polished M4
×
10
3
Right of inside chassis
Remove chain from sprocket large.
2.
VJ1324E-M-02
2
2
Name
P.3-179