Printing Problems - MUTOH ValueJet Service Manual

ValueJet 1304 Service manual
9.3.3

Printing Problems

Table 9-9 Symptoms, Check Items and Actions for Printing Problems
No. Symptom
1 Machine cannot print
sequentially.
2 Media feed after
printing is excessive.
Check item
1. printer driver may be
defective.
2. Program ROM may be
defective.
3. Main board assembly
may be damaged.
1. Is P_REAR sensor
assembly judged as
normal when checked
through "Test7: Rear"
of self-diagnosis
function?
2. Program ROM may be
defective.
3. Main board assembly
may be damaged.
9-41
Action
Update printer driver.
Update firmware.
Replace main board
assembly.
• Reconnect main board
assembly connector J42.
• Replace P_REAR sensor
assembly.
Update firmware.
Replace main board
assembly.
Reference
"7.3.5
Firmware
Installation"
p.7-21
"7.3.5
Firmware
Installation"
p.7-21
"4.3.3
Replacing
Main Board
Assembly"
p.4-29
"4.3.3
Replacing
Main Board
Assembly"
p.4-29
"4.9.2
Replacing
P_REAR
Sensor
Assembly"
p.4-90
"7.3.5
Firmware
Installation"
p.7-21
"4.3.3
Replacing
Main Board
Assembly"
p.4-29
AP-74109 Rev 1.1