Replacement Of Maintenance Section Components; Removing Maintenance Base Assembly - MUTOH ValueJet Service Manual

4.7 Replacement of Maintenance Section Components

4.7.1

Removing Maintenance Base Assembly

NOTE
• When replacing the parts inside the maintenance assembly, make sure to clear the following
counter parameters.
• "Waste Ink" or "Cleaning":
• Before replacing the parts in the pump cap assembly, remove the following parts.
• R side cover:
• Ink holder cover:
• Scroller receiver:
1. Enter "CR maintenance confirmation" mode using operation panel, then turn the printer power off.
Confirm that the cleaner head is positioned in the front side.
Manual"
"Operation
AP-74109 Rev 1.1
"6.3.1 Counter Display Menu" p.6-4
"4.2.1 Removing R Side Cover" p.4-6
"4.2.4 Removing Ink Holder (I/H) Cover" p.4-12
"4.2.9 Removing Scroller Receiver (L, R)" p.4-18
表 4-81
ValueJet 1304 Service manual
No.
1 Pump cap assembly
2 Cleaner head
1
4-72
Part name