MUTOH ValueJet Service Manual page 273

ValueJet 1304 Service manual
CAUTION
When the printer and PC are not directly connected with crossover cable but connected via
hub, the IP address needs to be different from that of devices on the network to be
connected. To connect via hub, consult with the network administrator.
(7) Connecting Printer to PC
1. Connect a ethernet cable to the network ports of
the printer and PC.
NOTE
• When connecting the printer and PC on a one-to-one basis, use a "crossover cable". When
connecting the printer and PC via hub, use a "straight cable".
• Use the printer and host PC on a one-to-one basis using crossover cable, not a part of network, as
possible.
7-17
Network port
AP-74109 Rev 1.1