Selecting Panel Language And Panel Temperature - MUTOH ValueJet Service Manual

2.4.5

Selecting Panel Language and Panel Temperature

This section describes how to select the language displayed in the operation panel.
Follow the steps below to select the language.
NOTE
You can choose panel language and panel temperature as follows.
Language:Japanese or English
Temperature:Celsius or Fahrenheit
1. Press [Power] key in the operation panel while
pressing [Cancel] key.
2. Press [Setting/value +] key or [Setting/value -]
key in the operation panel to modify the value.
3. To save the modified value, press [Enter] key in
the operation panel.
* panel temperature appears after panel
language. Operation is same as before.
AP-74109 Rev 1.1
ValueJet 1304 Service manual
2-12