MUTOH ValueJet Service Manual page 100

2. Pull out the CR_HP cable assembly connector from the CR_HP sensor.
1
3. Release the hook retaining the CR_HP sensor, then remove the CR_HP sensor.
4. Replace the CR_HP sensor.
5. To reassemble the unit, reverse the removal procedure.
6. Perform adjustments by following the instructions in
AP-74109 Rev 1.1
表 4-62
No.
2
"7.2 Adjustment Item"
4-54
ValueJet 1304 Service manual
Part name
1 Hook
2
CR_HP sensor
3 Connector
p.7-3.