MUTOH ValueJet Service Manual page 168

1. Remove the screws (round head spring screw finishing M4
plate on the right of the inside chassis.
1
3
2. Detach the chain from the sprocket large.
3. Remove the screws (round head spring screw finishing M4
motor mounting plate.
3
1
4. Remove the bearings.
5. Replace the VJ take up unit motor assembly.
AP-74109 Rev 1.1
表 4-151
2
2
表 4-152
1
2
表 4-153
2
×
10: 3 pieces) that retain the motor mounting
No.
1 Motor mounting plate
2 Screws that retain the motor
mounting plate (round head
spring screw finishing M4
3 pieces)
3 Right of the inside chassis
No.
1 Sprocket large
2 Chain
×
6:2 pieces) that retain the axis holder on the
No.
1 Axis holder
2 Screws that retains the axis
holder (round head spring screw
finishing M4
3 Motor mounting plate
4-122
ValueJet 1304 Service manual
Part name
Part name
Part name
×
6)
×
10: