MUTOH ValueJet Service Manual page 90

(2) Replacing Inlet Assembly
1. Remove the inlet assembly-retaining screws (round head spring screw (finishing) M3
2
2. Remove the connectors from the inlet assembly.
3. Remove the Inlet fixing board.
2
4. Replace the inlet assembly
5. To reassemble the unit, reverse the removal procedure.
TIP
When installing the inlet assembly, match the corresponding color connectors.
AP-74109 Rev 1.1
1
1
.
表 4-49
No.
1 Inlet assembly connector
2 Inlet assembly
3 Inlet assembly screw
(round head spring screw
(finishing) M3
3
.
表 4-50
No.
1 Inlet assembly
2 Inlet fixing board
4-44
ValueJet 1304 Service manual
×
10: 2).
Part name
×
10)
Part name