Replacing Vj Take-Up Cnt Board Assembly - MUTOH ValueJet VJ-1604 Maintenance Manual

VJ-1604 Maintenance Manual

4.13.3 Replacing VJ Take-up CNT Board Assembly

(1) Removing Board Chassis
1. Remove the screws (pan-head screw with spring washer and flat washer M3
board chassis on the chassis (out).
1
2. Detach the motor cable, W_ON sensor relay assembly and the W_OFF sensor relay assembly from the
connector to the VJ take-up CNT board assembly that appears.
1
3
3. To reassemble the unit, reverse the removal procedure.
2
3
2
4-143
No.
1 Board chassis
2 Screws that retain the board
chassis
3 Chassis (out)
No.
1 VJ take-up CNT board assembly
2
2 Motor cable
3 W_ON sensor relay assembly,
the W_OFF sensor relay
assembly
4 Parts Replacement
×
6: 4 pieces) that retain the
Part name
Part name
Rev.-00