Replacing Inlet Assembly - MUTOH ValueJet Service Manual

4.3.8

Replacing Inlet Assembly

NOTE
Before replacing the inlet assembly, remove the following parts.
• Media guide R2:
(1) Removing Cooling Fan (24V)
1. Remove the screw retaining the cooling fan (24V) (pan head small screw M 4
1
2. Remove the cooling fan (24V) cable connector.
3. Replace the cooling fan.
4. To reassemble the unit, reverse the removal procedure.
AP-74109 Rev 1.1
"4.2.8 Removing Media Guide R2" p.4-17
表 4-46
2
表 4-47
1
ValueJet 1304 Service manual
No.
1 Cooling fan (24V) screw
(pan head small screw M 4
30)
2
Cooling fan (24V)
No.
1 Cooling fan (24V) connector
4-42
×
30: 2).
Part name
×
Part name