Removals Onto The Roll Unit; Replacing The Core Cone Of The Roll Unit - MUTOH Unwinder Maintenance Manual

3.6. REMOVALS ONTO THE ROLL UNIT

3.6.1. Replacing the core cone of the roll unit

Step 1 :
Remove the top cover of the roll unit.
Step 2 :
Remove the front cover of the roll unit.
With front cover
Step 3 :
Loosen the screw fixing the core cone.
1 = screw fixing the core cone
Step 4 :
Remove the core cone.
Step 5 :
Slide the new core cone into the roll unit.
Without front cover
32
Roll systems – Maintenance Manual
AP-74100, Rev. 2.0, 12/01/05