Reference Information; Default Factory Settings; Vn-Matrix System Port Usage - Extron electronics VNR 100 User Manual

Reference
Information
This section provides information about:
•
•
•
•

Default Factory Settings

Network settings (ETH0)
Controller
Configuration

VN-Matrix System Port Usage

The VN-Matrix system uses a variety of network port numbers for streaming and inter-
communication functions. Just as the universal "telnet" function typically uses TCP port
number 23, VN-Matrix uses specific port numbers for its operation.
The table on the following page lists the port numbers used by the VN-Matrix series
products. The port numbers are, in most cases, for the sender. Port numbers used for
receiving are less important in regards to security.
When configuring a network, make sure it allows traffic on the ports required for your given
application. The ports highlighted in yellow accommodate most simple applications.
Default Factory Settings
VN-Matrix Port Usage
Included Parts
Mounting the VNR 100
IP address
Subnet mask
Gateway address
IP address
Port
User name
Password
192.168.254.254
255.255.255.0
192.168.254.253
192.168.254.254
5432
config
config
VNR 100 • Reference Information 20