Advanced Submenu
This submenu contains options to set a menu lockout PIN number and display GUI projects
and system information.
Figure 15.
Menu PIN mode — Press the ◄ or ► Navigation button to enable or disable the
•
use of a PIN number to access the setup menu.
Set PIN number — Press the
•
submenu. Press the Keypad buttons to enter a new four digit PIN number (see
figure 16).
Figure 16.
•
Controller IP address — Displays the IP address of the connected controller.
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Setup Menu
Advanced Submenu — Page 1
]
Navigation button to open the Enter New Pin
Enter New Menu Pin Submenu
16