Placing Originals; Original Orientation; Placing Originals On The Exposure Glass - Ricoh 917F Operating Instructions Manual

Placing Originals

This section describes the procedure for placing originals on the exposure glass and in the ADF.
Take care to place originals after any correction fluid and ink has completely dried. Not taking this
precaution could cause marks on the exposure glass that will be copied onto paper.
• For original sizes you can place on the exposure glass and in the ADF, see "Originals".
• p.11 "Originals"

Original Orientation

You can set the original orientation in the following ways.
1. ADF
2. Exposure glass
• Originals should be aligned to the rear left corner when placing them on the exposure glass. However,
some copy functions, such as Duplex, Combine, and Series Copies may produce different results
depending on the orientation of the originals. For details, see the explanations of each function.

Placing Originals on the Exposure Glass

Place originals on the exposure glass.
• Do not lift the exposure glass cover or ADF forcefully. Otherwise, it will be damaged, or the cover of
the ADF might open.
BRH009S
Placing Originals
1
15