Displaying The Port-Access Information - HP E3800-24G-PoE+-2SFP+ Access Security Manual

RADIUS Authentication, Authorization, and Accounting
Dynamic Removal of Authentication Limits
Note
HP Switch(config)# show port-access summary
Port Access Status Summary
Port-access authenticator activated [No] : No
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Note: * indicates values dynamically overridden by RADIUS
Authenticator
Port Enabled Mode Limit
---- + ------- ---- ----- + ------- ----- + ------- -----
1 | Yes
2 | Yes
3 | Yes
4 | No
Figure 6-34. Example of Summary Configuration Information Showing RADIUS Overridden Client Limits
6-72
Settings for these VSAs are in effect for the duration of the authenticated
session of the downstream supplicant switch. If for any reason there is a loss
of the session (link loss between authenticator switch and supplicant switch,
or authentication failure during reauthentication), the originally configured
802.1X and MAC authentication limits are restored.

Displaying the Port-access Information

The show port-access summary command displays the dynamically changed
client limit settings.
Syntax: show port-access summary [radius-overridden]
Displays summary configuration information for all ports,
including the ports that have client limits set by RADIUS
VSAs.
radius-overridden: Displays only the ports with client limits
that are overridden by RADIUS attributes.
If the command no aaa port-access authentication <port-list> client-limit is exe-
cuted, the port access is in port-mode. If the 802.1X client-limit is configured
with a value from 1-32, the port access is in user-mode.
Web Auth
Enabled Limit
user* 1* | Yes
user 32 | Yes
port 1 | No
port 1 | No
MAC Auth
Enabled Limit
1 | Yes 1
32* | Yes 32
1 | No 1
1 | No* 1