Displaying Information Of Lacp-Enabled Ports - HP V1910 User Manual

The Setup tab
a.
After finishing each configuration item, click the right Apply button to submit the configuration.
2 describes the configuration items.
LACP priority configuration items
2.
Item
Select LACP enabled port(s) parameters
Select port(s) to apply Port Priority
System Priority
Return to Dynamic aggregation group configuration task

Displaying information of LACP-enabled ports

Select Network  LACP from the navigation tree. The Summary tab is displayed by default, as shown in a.
Description
Set a port LACP priority.
Select the ports where the port LACP priority you set will
apply on the chassis front panel.
You can set LACP priority not only on LACP-enabled ports but
also on LACP-disabled ports.
Set the LACP priority of the local system.
list.
212