VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
Each control rod has a spring located between the rod and
If the rod doesn't return to the fully raised position, the
Unbolt the magnetic trigger to remove the control rod.
Use a magnet to remove the spring.
The countersink hole in the control rod faces the slot on
Line up the countersink hole on the control rod with the
Install the magnetic trigger and make sure to orient the
trigger with the magnet facing down, so the trigger can
Apply anti-seize to the threads on the shoulder bolt.