J&J Amusements Bumper Boat 2014 Service Manual page 60

1-26
Place the boat top on the hull.
Open the vent plate to access the rubber hinge.
Pre-drill through the rubber hinge.
Insert six rivets through the hull and rubber hinge.
Insert a backing washer on inside of each rivet.
Holding the backing plate, insert the rivets.
Connect all wiring connections
(see wiring diagram on page 4-18).
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com