J&J Amusements Bumper Boat 2014 Service Manual page 119

VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
Inspect the pivot bushing and drive shaft bushing for wear (i.e.
grooves, pitting and cracking). If any of these conditions exist,
it is recommended that the part be replaced.
The mount bushings do have a top and bottom.
Position the bushings' thicker web to the top of the motor and
USE A LIBERAL COATING OF MARINE-TYPE GREASE, SUCH
AS J&J CORROSION BLOCK # 99109, ON THE WEAR SUR-
NOTICE: Index tabs of the insert bushing face each other
inside the pivot shield. These tabs align with the pivot stop on
NOTICE: When installing Nylock nuts on the pivot,
MARINERS CHOICE NEVER SEEZ® or equivalent must be
Remove the pivot bushing.
the thin web toward propeller.
FACES DURING REASSEMBLY.
the drive housing.
used to prevent corrosion and galling.
503-304-8899
3-31