J&J Amusements Bumper Boat 2014 Service Manual page 162

Decades of evolution have created
the highest quality, best performing
Master Blaster
Base: 12"x12"x3/8" Steel
Mounting Holes (4) 1/2"
Diameter:10.5" Center to center
Center Column: 3.5" Steel Pipe
Adjustable Height: 40" to 48"
Adjustable Rotation Arc:0 to 120 in
15 degree increments
Adjustable Squirter Distance: 10 to
25 feet
Replaceable Rotation Bushings:
UHMW
Water Supply: 30 to 80 PSI (City or
Park System)
Paint: Double coating - Special
process
Coin Operated "Pond Side" Water Squirter
go-karts & bumperboats
Are you looking for a way to make more money? Here's an easy
way. Just mount a few of the Master Blaster Water Squirters
around your bumperboat pond and voila!
A simple, rugged money maker. Quick payout on this attraction.
Easy installation, Four 1/2" anchor bolts on 10-1/2" centers.
One half inch NPT nipple to interface with park fresh water sup-
ply system. 24VAC Ground fault interrupter circuit required.
(check local electrical codes).
Metal parts protected by special double coating process for
corrosion protection. Each unit can be adjusted (both height
and water flow) to meet your needs. Fitted with a quick change
coin/token mechanism.
Cover: Fiberglass Top with Choice
of Color.
Control System
Cabinet: NEMA/EEMAC Type 4
Cabinet Size: 13.78"x11.81"x7.87"
Coin Mechanism: Quarter Size
Coin
Coin Box: 6"x7"x4"
Setable Coin Amount: 1 to 7 coins
Adjustable "On" Time: .1 to 12.7
Minutes
Power: 24VAC @ 2 amps
Power Source: GFI Breaker
Required
Internal Fuse:2 Amp
in the industry.
4897 Indian School Road NE
Salem, Or. U.S.A. 97305
1-800-854-3140 or 1-50-304-8899
www.jjamusements.com