J&J Amusements Bumper Boat 2014 Service Manual page 106

3-18
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
To remove the motor cap, tap off by using a rubber mallet or
Be careful when assembling the motor, as the magnetism will
screw. Be careful to not over-tighten the set screws; just snug
Set screw
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
Clean the commutator with an emory cloth and electric mo-
tor cleaner, if needed. Clean off only the carbon build-up.
Try not to remove any brass material.
The brush holders are plastic and held in place with a set
soft-blow hammer.
Remove the cap.
NOTICE
<CAUTION>
pull the pieces together.
Keep fingers clear.
NOTICE
them up.