J&J Amusements Bumper Boat 2014 Service Manual page 56

1-22
VENT PLATE ASSEMBLY (Electric only)
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
Protect your boat from harmful ULTRA VIOLET rays and keep it
looking like new with 303 Aerospace Protectant!
The vent plate is located at the rear of the boat top.
Open the vent plate to access the charging cable,
and to perform visual inspections.
To open, turn counterclockwise.
The v
ent plate assembly is mounted with six 10-32
phillips-head screws with six 10-32 nylock nuts.
To replace the vent plate assembly, remove the six
Inspect the gasket for damage and replace as
screws.
needed.