Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
THE RIGHT TOOL FOR THE JOB.
CRIMP WITH EASE! J&J #2-70-0073-120
Install a clear tube (J&J #2-60-0094) over the cable and
install strain relief on both sides of the cable utilizing the
two pan head-screws and nylocks.
Insert the terminal contacts into the SB-120 housing and
push until the terminal snaps into the housing.
NOTICE: THE WHITE WIRE IS TO POSITIVE, THE BLACK
WIRE IS NEGATIVE. REVERSING THESE LEADS WILL
RESULT IN A BLOWN CHARGER OUTPUT FUSE.
Install and tighten strain relief to the housing using the