Squirt Pump Assembly - J&J Amusements Bumper Boat 2014 Service Manual

3-38

SQUIRT PUMP ASSEMBLY

Remove the motor cover and neoprene protector
(see page 3-3).
Cut and remove the zip tie from the hose.
Remove the hose from the filter by squeezing the spring
clamp and sliding the clamp away from the filter.
Slightly pull and twist to remove the hose from the filter.
Cut and remove the zip tie from wiring.
IN-LINE SQUIRT PUMP FILTERS AVAILABLE. #001772
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com